Due to the profile of the Curt Class III trailer hitch # C13126, most of the hitch crossbar is recessed under the rear fascia of a 2013 Nissan Pathfinder. Therefore this hitch does not include a mounting location for trailer wiring.
Since there is limited space on the hitch crossbar, a mounting bracket is not included on the hitch. Additionally, the rear fascia has to be trimmed to complete the installation of this hitch. I have included a photos showing this hitch installed on a 2013... view full answer...
The Curt Trailer Hitch Receiver # 13573 does not come with the hitch pin, that is sold separately. This is a 2 inch hitch, so all you need is the following:
- Trailer Hitch Pin and Clip # C21510 view full answer...
The Draw-Tite Class I Trailer Hitch, # DT24959, does not come with a ball mount. You will need to order one. To add a hitch ball, you will first want to determine the size of hitch ball that your trailer requires. You can use a 1-7/8 inch hitch ball, # 19256, or a 2 inch hitch ball, # 19258.
Please note, this hitch will fit your 2008 Subaru Impreza as long as it is the hatchback model with single exhaust. This hitch will not fit the WRX STi models.
If your Impreza is a sedan, not STi... view full answer...
The Swagman XC 2-Bike Rack for 1-1/4" and 2" Trailer Hitches # S64650 is a great platform bike option for your 2003 Subaru Forester, so long as it is already equipped with a trailer hitch receiver, like the Draw-Tite Trailer Hitch Receiver # 36311, designed to fit the frame of your Forester.
To use the bike rack, you do not need any extra parts. Everything you need to install it on a trailer hitch is included with part # S64650.
The only time you'll need to use a ball mount, is for trailer... view full answer...
The Class III Draw-Tite Trailer Hitch, # 75599, for the 2006 Honda Pilot does not come with a ball mount, pin, clip, or ball. Only the Class II and I hitches we sell come with a ball mount, pin and clip. This is because the lower Class hitches have to use a certain ball mount according to the manufacturer for safety. A Class III trailer hitch does not have this restriction.
A Class III trailer hitch will also have a higher capacity and is compatible with more accessories than Class I and... view full answer...
The Curt Trailer Hitch Receiver part # C11831 is the only available trailer hitch option for a 2006 Saab 9-5. It does not come with any trailer wiring or ball mounts/hitch balls because not all those who use a trailer hitch do so for towing. That said, we do have all these parts you need. The Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236 is what you need to operate the trailer lights and the Curt Class II Drawbar part # C45521, Curt Class I and II Pin... view full answer...
The Chevrolet - Brake Light Trailer Hitch Receiver Cover for 2 inch Trailer Hitches, item # CR-007C, illuminates but does not have LED lights.
If you are looking for a Chevrolet Bowtie light up hitch cover with LED lights, I suggest the Chevrolet - Brake and Tail Light L.E.D. Trailer Hitch Receiver Cover for 2 inch Trailer Hitches, part # CR-017C. view full answer...
The ball mount that comes with Hidden Hitch trailer hitch # 60301 (no longer available) for your 2016 Hyundai Accent hatchback is # 3592. On a Class I trailer hitch like this you have to use the ball mount specified by the hitch manufacturer or it voids the hitch warranty. The ball mount must be used in the rise position only.
For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # C56254. Please note that the vehicle owner's manual states that... view full answer...
You will need a pin and clip or a hitch lock to secure the Indiana University Logo Trailer Hitch Cover, item # AMG100178, in the 2 inch trailer hitch. I have listed some options for you below.
Pin and Clip # PC3
Hitch Lock # e98880 view full answer...
The Curt Hitch part # 13703 is a very universal trailer hitch that can be installed on I-beam frames like what your trailer has, the bend in the hitch brackets will accommodate your frame. This would be a great option for you. I attached an install video for you to check out as well. view full answer...
The Au-Tomotive Gold Honda Trailer Hitch Cover # AUT-HON-C does not include a pin-and-clip nor a gasket for installation. A pin-and-clip kit # C21510 is available, as is a locking anti-rattle kit # 63232 which will both prevent theft and eliminate any potential for rattle in the hitch opening. This hitch cover will easily fit in your 2-inch hitch. view full answer...
While we do not have a custom fit trailer hitch receiver for your 1989 Grumman Olson, we do still have another alternative.
Instead, you'll need to use either the:
-7" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch # 4907, which has a 7" drop.
Or
-The 16" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch # 4916, which has a 16" drop.
From here you can use the Draw-Tite Ultra Frame Service Body Trailer Hitch # 41990-16.
This... view full answer...
The Curt trailer hitch # C13087, comes with the hitch itself and all necessary hardware to install it. Wiring, ball mounts, balls, and other accessories are sold separately. This is because different vehicle could require different size balls and ball mounts based on the trailers they are towing.
This hitch fits 1996 to 2002 Toyota 4Runners, all models.
I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For... view full answer...
The Curt trailer hitches we offer, such as the Curt Trailer Hitch Receiver # C13143 that is confirmed to fit your 2013 Lexus RX 350, do not include a hitch cover.
We have a large selection of hitch covers available like the Curt Rubber Tube Cover # I-728 or # C22272 that are designed for 2 inch hitch receivers. I have attached a link that will take you to our available selection of hitch covers for you to look through. view full answer...
We do carry trailer wiring harnesses but the Curt hitch, part # C11041, does not include any wiring. Hitches generally come without any wiring because not everyone is going to use the hitch to tow.
The hitch fits specific trims of the Ford Mustang V6 Models between 1994 and 2004. There are specific wiring harnesses that fit the specific style of vehicle so if you can give me the details of your Mustang I can recommend the correct wiring harness to fit. view full answer...
The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit part # SH27FRT which is a fit for a 2019 Volvo XC90 comes with a 7 to 4-way adapter plug so you can hook up to a trailer with either trailer connector. view full answer...
The Swagman XTC4 4-Bike Rack # S64665 does include a hitch lock. The hitch pin is threaded as well to serve as an anti-rattle device, which will minimize movement of the bike rack in the trailer hitch receiver. The threaded hitch pin locks to the trailer hitch. A braided steel cable is also included to help secure the bikes to the rack.
The XTC4 # S64665 is designed to only fit a 2 inch trailer hitch receiver. No adapter is needed because the bike rack shank is designed to fit a 2 inch... view full answer...
Yes, the Hidden Hitch Class III Trailer Hitch for your 1998 Jeep Wrangler does include a mounting bracket that can be used to install a 4-Way trailer wiring bracket, # 18144, or a 7-Way trailer wiring connector bracket, # 18138.
The photos on our site are actual photos of the hitch, and we have a video installation that shows the hitch, with bracket, going on a 2000 Jeep Wrangler that should be helpful. view full answer...
Yes, all of our trailer hitches come with all of the hardware needed to install them. For your 2020 Honda CR-V I highly recommend going with the etrailer Trailer Hitch # e98848 because it's the only option that has a matte black finish. This not only matches the trim style of your vehicle but it actually does a better job of protecting the trailer hitch than the glossy black finish does on the other hitches available. I have attached an installation video for you to check out.
If your... view full answer...
The Draw-Tite Class II Trailer Hitch, item # 36501, for the 2011 Ford Escape does not include the wiring harness for the vehicle.
For trailer lighting you will need the Tow Ready Custom Fit Vehicle Wiring, item # 118551, for your 2011 Ford Escape. I have posted installation instructions and an install video for you to review.
You may also want to consider the following items to complete your Class II towing setup.
Draw-Tite Ball Mount, item # 36051
Hitch Ball, item # 19258
Hitch Ball,... view full answer...
Go To Results